null
Skip to main content

Silicone Pressure Seam Roller | 40mm Diameter

R5,202.06
(Inc. GST)
R4,728.96
(Ex. GST)
(No reviews yet) Write a Review
SKU:
SPSR40-AUS
Availability:
Order processed upon receipt and shipped within 24 hours to all major cities via Australia Post. Delivery within 5 working days, slightly longer for regional and remote areas.
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Heavy Duty Silicone Roller - Helps Remove Air Bubbles When Applying Tear Aid Patches

Tear Aid Application Method

1. Measure the damaged area and cut the strip to size (allowing at least 2.5cm on each side of the damage), slightly rounding off the corners. *If damage is long and wide and extensive, make sure you increase the allowance accordingly

2. Clean the damaged area thoroughly with Romed Alcohol Preps

3. Allow the area to dry completely before commencing the repair

4. Remove a little of the backing paper from one end and stick that end down on the surface (*at least 2.5cm from the start of the damage)

5. Gently remove the backing paper while very firmly pressing on the Tear Aid all the way to the end

6. Use this Silicone Roller to remove all air bubbles trapped between the Tear Aid and the surface you're repairing

7. Roll over the entire area again very firmly and allow requires time to set